Protective nut cap for heat shrinking foil on the connecting tube of the gas cylinder valve
- Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
- Thread dimensions are W 21.80 x 1/14 LH
- Possibility of use with heat shrinkin foil
- Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
- Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
- The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material),
it maintains mechanical strength up to 120 bar
- The material is Polypropylene copolymer ( PPc original raw material),
it maintains mechanical strength up to 60 bar
- Possibility of indicating a serial number,code,date etc.
- Customized colour,marks and logo
- Protected industrial design
Protective nut cap with the adapter on the connecting tube of gas cylinder valve
- Main feature of this 'protective nut cap' is a protective ring,which,interlocked with a geared adapter,creates a safety system of gas protection within the cylinder.This primarly refers to the protection of the distributor towards the end customer
- Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
- Thread dimensions are W 21.80 x 1/14 LH
- Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
- Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
- The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
- Possibility of indicating a serial number,code,date etc.
- Customized colour,marks and logo
- Protected industrial design
Protective nut cap with a string on the connecting tube of the gas cylinder valve
- Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
- String is attached on the mouth or around the valve
- Prevents the loss of the protective nut cap
- Thread dimensions are W 21.80 x 1/14 LH
- Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
- Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
- The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
- String is made of PA 6 (original raw material)
- Possibility of indicating a serial number,code,date etc.
- Customized colour,marks and logo
- Protected industrial design
Fast change protective nut cap/Plastic cap with spring-lock for lift fork truck’s gas bottle
- Conforms to the requirements of the European standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
- Used with liquid phase cylinders (22 mm)
- Used with cylinders in households and catering (20 mm)
- The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material),
it maintains mechanical strength up to 120 bar
- String made of PA 6 (original raw material)
- Possibility of indicating a serial number,code,date etc.
- Customize colour,marks and logo
- Protected industrial design
Protective cover for gas tank (seal)
- Used for closing (sealing) gas tank valves
- Possibility of indicating a serial number,code,date etc.
- Customized colour,marks and logo
Rubber seals for gas regulators
- Conform to the requirements of the European standard EN 549-2001
- Rubber seal is made of a mixture of NBR rubber/PERBUNAN
- In compliance with the mehanical strength,hardness and permanent deformation requirements according to the standards ISO 37;ISO 868 and ISO 815
- In compliance with the requirements of the standard HRN ISO 11114-2:2002,entitled Compatibility of Polymeric Materials/NBR Elastomers and gas
Gas hose (for connecting the gas cylinder to the gas regulator)
- Hoses are made of a rubber mixture based on NBR-rubber
- They conform to the standard ISO 868,DIN 53505;the standard ISO 37,DIN 53504;the standard ISO
1817,DIN 53521;the standard ISO 37,DIN 5350
- They are manufactured in five lengths: 0.75,1.00,1.50,2.00 and 3.00 m
Gas regulator components
- Diaphragms
- Rocker arms
- Name plates
|
|